Banner

新闻详情

Home > News > Content

What are the precautions for dacromet processing by dacromet coating manufacturers?

Edit:Xinxiang Chui Auto Parts Co., Ltd.UpDate:2019-03-21

Dacromet is a very popular surface treatment technology in recent years. Compared with the traditional electroplating process, it is more prominent in environmental protection. However, Dacromet itself also has certain limitations, so in order to ensure To use the effect, we must avoid these limitations. Dacromet coating manufacturers will take everyone to understand together.

1. The use time of Dacromet is relatively short, so it is recommended to use it up as soon as possible.

2. Dacromet will age rapidly when exposed to light. It is recommended that the coating process of Dacromet be carried out indoors to avoid direct light.

3. The wear resistance of Dacromet is poor. It is recommended to apply Dacromet as a primer, and then apply other wear-resistant coatings to seal it.

4. If the baking temperature of Dacromet is too low or too high, Dacromet will lose its antiseptic ability. Dacromet should be baked in a suitable temperature range.

The general flow of the process:

Organic solvent degreasing - mechanical shot blasting - spraying - baking - 2 times spraying - baking - drying.

Dacromet coating can be applied to a wide range of materials. It can be used in steel products and non-ferrous metal industries. The whole coating process is pollution-free. Our factory mainly sells Dacromet. For more relevant knowledge, you can go to Dacromet Coating manufacturer's official website to understand.