Instructions for technical requirements of anti-corrosion coating

Anti-corrosion coating is often applied on the surface of metal parts as a metal surface treatment agent. With the frequent occurrence of severe weather, although people also pay attention to environmental protection, the phenomenon of metal corrosion is inevitable, and the use of anti-corrosion coating on metal In fact, it will not only protect the metal surface to a certain extent, but also reduce the damage of metal objects, and will not affect its use efficiency. So what should be paid attention to when applying anti-corrosion coating?

The coating has a wide range of applications and can be applied to almost all shapes and sizes of product workpieces. For example, bolts, gaskets, screws, anti-corrosion equipment linings, corrosion-resistant centrifugal pumps, anti-corrosion films on various workpieces, valve bodies, cylinders, Ball components, anti-corrosion equipment for offshore platforms, etc.

It has a very low coefficient of friction, and its range is about 0.05-0.2. It can be applied to mechanical parts that require a high friction coefficient. It can also be self-lubricating while reducing the friction coefficient and increasing wear resistance.

The insulation strength of the coating can reach 500-1200 volts per microinch, which can achieve the effect of inhibiting electrochemical corrosion. In addition, it can also prevent the erosion of hot soil layers, most chemicals and ultraviolet rays.

The coating is dense and smooth, with good flexibility, and can provide a variety of color options, such as red, green, black, blue, etc., which is easy to divide and manage.

Strong adhesion, can be evenly distributed on the surface of the substrate, not easy to fall off and peel after long-term use.

The above are the technical requirements for anti-corrosion coating. In fact, in addition to the rainy summer, after snowing in winter, in order to reduce the point where the road snow freezes, salt is often sprinkled on it, and after the vehicle is driven, some salt will be contaminated on the surface substances to form electrolytes, thereby corroding the vehicle skin. Applying anti-corrosion coating on the vehicle surface also has a certain protective effect on the vehicle skin. Parts produced by lathes can also be coated with anti-corrosion coating to improve the accuracy of the parts.