Banner

Dacromet manufacturers

Dacromet manufacturers
Dacromet manufacturers

Dacromet has a wide range of applications. Below we will ask Dacromet manufacturers to introduce the advantages of this process:
1. Good corrosion resistance: the thickness of the Dacromet coating is only 4-8μm, but its anti-rust effect is more than 7-10 times that of the traditional electro-galvanizing, hot-dip galvanizing or paint coating method. Using Dacromet The standard parts and pipe fittings treated by Luo process have passed the salt spray resistance test for more than 1200h without red rust.
2. No hydrogen embrittlement: Dacromet's treatment process determines that Dacromet has no hydrogen embrittlement phenomenon, so Dacromet is very suitable for coating of stressed parts.
3. High heat resistance: Dacromet can resist high temperature corrosion, and the heat resistance temperature can reach more than 300 degrees Celsius. However, in the traditional galvanizing process, when the temperature reaches 100 degrees Celsius, it will be peeled and scrapped.
4. Good adhesion and recoating performance: Dacromet coating has good adhesion to the metal substrate, and has strong adhesion with other additional coatings. The treated parts are easy to spray and color, and the combination with organic coatings The strength even exceeds that of phosphating film.
5. Good permeability: Due to the electrostatic effect, it is difficult to electroplate zinc on the deep holes, slits, inner walls of pipe fittings and other parts of the workpiece, so the above parts of the workpiece cannot be protected by electroplating. Dacromet can enter the workpiece These parts form a Dacromet coating.
6. No pollution and public nuisance: Dacromet will not produce waste water and waste gas that pollute the environment during the whole process of production, processing and workpiece coating, and it does not need 3 waste treatment, which reduces the treatment cost.

Previous: Dacromet coated parts

下一条: Dacromet bolt